Vinyl flooring installed10/7/2023 It’s important to know what installation method was used so you know what to expect from your recent installation – for example: Lastly, they will ask you to walk through the job with them to make sure all work is completed to your satisfaction. Please remember, this is the first time our installers have been in your home and they will do their best to put all the furniture back in their proper locations. Once the installers finish installing your new flooring, they will clean up and remove all work-related debris and then begin moving the furniture back into the space. Your estimator will review and select the appropriate installation method with you prior to the installers’ arrival. Direct glue down is more permanent, while floating can move a bit under foot (deflection). The main differences apply to the look and feel of the flooring once installed. Vinyl floors can be installed as a direct glue down or floating method. Once everything is prepped, the installers will begin installing your new floor. Proper subfloor prep is required by the manufacturers and helps reduce the visibility of slight variations, dips, or humps in the floor. Once the existing floor is removed, they may need to install new plywood for existing wood subfloors or a patch/skim coat on concrete subfloors. The installers will need to remove the existing floors and it should be known that they will have to use tools like saws, crow bars and even scrapers that will generate noise, dust and may cause nail pops in the ceiling below. Be assured, they will use drop cloths to protect nearby furniture and delicate items. This allows the installers to review the materials with you and confirm installation areas and if need be, the contractor may ask where they can set up a saw/work station to make cuts (if applicable). We strongly recommend customers be home when the installers first arrive. IMPORTANT NOTE: Shade, sheen, and lighting all impact the look and appearance of your new vinyl flooring. In such cases, the estimator/installer will review any issues and adjust pricing for any additional work/repairs that may need to be done. Our installers occasionally discover unforeseen issues or damage once we remove existing flooring. Be sure to raise questions and concerns about the subfloor, timing and finishing/trim before the installation starts so we can address these issues and plan accordingly.Ensure that your home has an operational HVAC unit(s) before, during, and after installation.Remove all small personal items, electronics and breakables from the tops of furniture and from closets where the new flooring will be installed. Remove all furniture from the construction area as agreed upon with the estimator prior to the arrival of our installers.If you’re remodeling more than your floor, all other construction projects should be completed.The estimator will also review how to make the installation process smooth and efficient, including the following tips: Once our warehouse receives your order, an installation manager will call you to schedule the installation of your new vinyl.ĭuring the ordering process, the estimator who visited your home will have already discussed the installation process, including the layout of your new floor, and the removal of your existing floor, if needed.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |